Carefully unpack your shades and check to make sure you have the
following parts. We recommend reading through these instructions before starting the installation.
You will need:
Drill with a V" bit and a hex head and/or Phillips bit
Metal tape measure
Mounting Your Shades:
Step 1: Determine where you would like the shade hung. Align shade above window in center and level shade. Next, use holes on L Brackets to mark spots with pencil on the wall for the screws.
Step 2: Attach L Brackets to wall with long screws. You may need two people for this, one to hold the shade while the other screws into the wall. “Primp” your shade and enjoy!
Step 1: Determine where you would like the shade hung. Align shade inside at very top of window molding in center and level shade. Choose either to mount the brackets straight or as a side mount. Next, mark spots with pencil on the inside trim for the screws ( can use L Brackets as a guide for marking spots).
Step 2: Attached L Brackets in desired location to shade headrail with small screws. Hold shade back in place with L Brackets attached.
Drill L Brackets and shade into pre-marked spots. You may need two people for this, one to hold the shade while the other screws the L Bracket/shade into the trim. “Primp” your shade and enjoy!
Shade Care Instructions:
Once the shade has been installed, any wrinkles will hang out on their own within one to two weeks. A garment or fabric steamer may also be used to smooth out any wrinkles. Shade can be cleaned with a lint brush or vacuum attachment.
Professional Installation Services- Need some help with your Installation? We have that covered too! We’ve put together a trusted network of professionals that can help with your measuring and installation needs! Please contact us for a list of referrals.